Milling Scarifier Cutters
Utilize the milling cutter for removing thick and soft materials such as: mastic, thermo-plastic, waterproofing membranes, cold plastic coatings, glues, etc... It leaves the surface smooth and ready for preparation. Often used to remove bulk of material prior to a carbide tip cutter.
| Part No. | OD | ID | Thickness | Style |
|---|---|---|---|---|
| Routing / Crack Chasers | ||||
| KRMC-363 Hub | 3.63" | 1" | .36" | 8 point |
| KRMC 363 w/out Hub | 3.63" | 1" | .36" | 8 point |
| KRMC-484 Hub | 4.84" | 1" | .36" | 8 point |
| KRMC-484 w/out Hub | 4.84" | 1" | .36" | 8 point |
| Milling Cutters | ||||
| KRMC-401115 | 1.575" | .591" | .433" | 5 point |
| KRMC-402215 | 1.575" | .591" | .866" | 5 point |
| KRMC-552218 | 2.165" | .709" | .866" | 6 point |
| KRMC-552225 | 2.165" | .984" | .866" | 6 point |
| KRMC-802026 | 3.150" | 1.024" | .787" | 6 point |
| KRMC-802030 | 3.150" | 1.181" | .787" | 6 point |
| KRMC-803930 | 3.150" | 1.181" | 1.535" | 6 point |
| KRMC-803926 | 3.150" | 1.024" | 1.535" | 6 point |
